From this setup for OpenVPN Server on Ubuntu 16.04..
We need to unbolt some of the security features of the server config for Mikrotik compatibility… took some tinkering to solve this
Following this guide.
NOTE 1: In the part where they edit
I edited the server directive to read:
server 192.168.155.0 255.255.255.0
then my UFW rules are
# START OPENVPN RULES Continue reading “OpenVPN Server on Ubuntu 16.04”
# NAT table rules
:POSTROUTING ACCEPT [0:0]
# Allow traffic from OpenVPN client to ens3 (change to the interface you discovered!)
-A POSTROUTING -s 192.168.155.0/24 -o ens3 -j MASQUERADE
# END OPENVPN RULES
So the banana plugs on the back of my sub failed/the plastic back plate melted when I used the sub as a wind break. I decided to re-do the connection using really good Neutrik Speakon connectors.